Yamaha RX-A3060, Owner'S Manual

Page: 121 / 230

En
121
Input menu items
X
• Available items vary depending on the selected input source.
• Default settings are underlined.
⬛
Rename/Icon Select
Changes the input source name and icon displayed on the front display or TV screen.
Input sources
AV 1-7, V-AUX, AUDIO 1-3, PHONO, USB
⬛
Setup procedure
1
Use the cursor keys (
e
/
r
) to select “Auto” or “Manual” and press the cursor key (
w
).
If you select “Auto”, the unit creates a name automatically according to the connected device.
Proceed to Step 3.
X
This step is available only when “AV1-7”, “V-AUX” or “AUDIO1-3” is selected.
2
Use the cursor keys (
e
/
r
) to select a template and press the cursor key (
w
).
3
Use the cursor keys (
e
/
r
) to select an icon and press the cursor key (
w
).
4
Press ENTER to enter the name edit screen.
5
Use the cursor keys and ENTER to rename and select “ENTER” to confirm the entry.
X
To clear the entry, select “CLEAR”.
6
Use the cursor keys to select “OK” and press ENTER.
X
To restore the default setting, select “RESET”.
7
To exit from the menu, press ON SCREEN.
⬛
Decoder Mode
Sets the format of digital audio playback to “DTS”.
For example, if the unit does not detect DTS audio and outputs noise, set “Decoder Mode” to
“DTS”.
Input sources
AV 1-7, V-AUX, AUDIO 1-3 (available only when any audio digital input jack is assigned)
Settings
Item Function Page
Rename/Icon Select Changes the input source name and icon. 121
Decoder Mode Sets the format of digital audio playback to DTS. 121
Volume Interlock Enables/disables volume controls from iTunes/iPod via AirPlay. 122
DMC Control
Selects whether to allow a DLNA-compatible Digital Media
Controller (DMC) to control playback.
122
Auto Automatically selects an audio format to match the input audio signal.
DTS Selects DTS only. (Other audio signals are not reproduced.)