Yamaha RX-A1010 Owner'S Manual Download Page 43

Page: 43 / 188

Measuring at one listening position
(single measure)

When “Multi Position” is set to “No”, follow the procedure below to
make the measurement.

• YPAO measurement is not performed correctly when any obstacles are in the

room.

• During the measuring process (about 3 minutes), keep stuff in the corners or

remove it from the room.

To start the measurement, use the cursor keys to
select “Measure” and press ENTER.

The measurement will start in 10 seconds. Press ENTER
again to start the measurement immediately.

• To cancel the measurement, press RETURN.

The following screen appears on the TV when the
measurement finishes.

• If any error message (such as E-1) or warning message (such as W-1)

appears, see “Error messages” (p.45) or “Warning messages” (p.46).

• To check the measurement results, select “Result”. For details, see

“Checking the measurement results” (p.44).

Use the cursor keys to select “Save/Cancel” and
press ENTER.

To save the measurement results, use the cursor
keys to select “SAVE” and press ENTER.

The corrected speaker settings are applied.

• To finish the measurement without saving the result, select “CANCEL”.

Disconnect the YPAO microphone from this unit.

Now optimization of the speaker settings is complete.

Caution

• Since the YPAO microphone is sensitive to heat, do not place the microphone

in any place where it will be subjected to direct sunlight or high temperatures
(top of an AV equipment, etc).

SCENE

RETURN

VOLUME

SUR. DECODE STRAIGHT

ENHANCER

SLEEP

PURE DIRECT

AUDIO

V-AUX

INFO

MEMORY

PRESET

PARTY

MOVIE

MUSIC

RADIO

MUTE

ENTER

CATEGORY

MODE

HOLD

TAG

PRG SELECT

ENT

HDMI OUT

TV VOL

TV CH

TOP

MENU

POP-UP

MENU

DISPLAY

SOURCE

MAIN

ZONE 2

RECEIVER

CODE SET

INPUT

MUTE

DOCK

PHONO

OPTION

ON SCREEN

MULTI

TUNER

TUN./CH

NET

USB

SIRIUS

BD/DVD

SCENE

VOLUME

SUR. DECODE STRAIGHT

ENHANCER

SLEEP

ENHANCER

URE DIRECT

AUDIO

V-AUX

INFO

MEMORY

PRESET

MOVIE

MUSIC

RADIO

MUTE

CATEGOR

MODE

ENT

TOP

MENU

POP-UP

MENU

DISPLAY

SOURCE

MAIN

ZONE 2

RECEIVER

CODE SET

INPUT

MUTE

DOCK

PHONO

OPTION

ON SCREEN

MULTI

TUNER

TUN./CH

NET

USB

SIRIUS

BD/DVD

ENTER

RETURN

1 2 3 4 5 6 7 8

Automatic speaker setup

Cursor keys

Summary of Contents for RX-A1010





























































































































































































Search results

Summary of Contents for RX-A1010

Reviews:

Related manuals for RX-A1010

Brands by name

Popular brands

Yamaha RX-A1010, Owner'S Manual

Search results

Summary of Contents for RX-A1010

Reviews:

Related manuals for RX-A1010

Brands by name

Popular brands