Yamaha RX-A1010 Owner'S Manual Download Page 111

Page: 111 / 188

110

❑

ARC

Enables/disables ARC (p.25) when “HDMI Control” is set to “On”.

Settings

• You do not need to change this setting normally. In case noises are produced from the speakers connected

to this unit because TV audio signals input to this unit via ARC are not supported by this unit, set “ARC” to
“Off” and use the TV speaker.

❑

Standby Sync

Select whether to set this unit to standby in conjunction with TV power-off when “HDMI
Control” is set to “On”.

Settings

■

Audio Output

Selects a device to output audio.

• The “Amp” and “HDMI OUT1” settings are available only when “HDMI Control” is set to “Off”.

❑

Amp

Enables/disables the audio output from the speakers connected to this unit.

Settings

❑

HDMI OUT1, HDMI OUT2

Enables/disables the audio output from a TV connected to the HDMI OUT 1 jack or
HDMI OUT 2 jack.

Settings

■

Standby Through

Select whether to output videos/audio (input through HDMI jacks) to the TV when this
unit is in standby mode.

Settings

• This setting is available only when “HDMI Control” is set to “Off”.

Off

Disables ARC.

On (default)

Enables ARC.

Off

Does not set this unit to standby mode in conjunction with TV
power-off.

Sets this unit to standby mode in conjunction with TV power-
off.

Auto (default)

Sets this unit to standby mode in conjunction with TV power-off
only when this unit is receiving TV audio or HDMI signals.

Off

Disables the audio output from the speakers.

On (default)

Enables the audio output from the speakers.

Off (default)

Disables the audio output from the TV.

Enables the audio output from the TV.

Off (default)

Does not output videos/audio to the TV.

Outputs videos/audio to the TV.
(This unit consumes approximately 3 W of power.)

Summary of Contents for RX-A1010





























































































































































































Search results

Summary of Contents for RX-A1010

Reviews:

Related manuals for RX-A1010

Brands by name

Popular brands

Yamaha RX-A1010, Owner'S Manual

Search results

Summary of Contents for RX-A1010

Reviews:

Related manuals for RX-A1010

Brands by name

Popular brands