Yamaha RX-A1010, Owner'S Manual

Page: 115 / 188

En
114
Function
Configures the functions that make this unit easier to use.
■
Auto Power Down
Sets the amount of time for auto-standby. If you do not operate this unit for the specified
time, this unit will automatically go into standby mode.
Settings
■
Input Assignment
Assigns the COMPONENT VIDEO, COAXIAL and OPTICAL jacks to another input
source.
■
Setup procedure
Example: assigning the OPTICAL (
e
) jack to the input source “AV2”
1
Use the cursor keys to select the cell at the intersection of “AV2” and “Optical”, and
press ENTER.
2
Use the cursor keys to select “
e
” and press ENTER.
3
To exit from the menu, press ON SCREEN.
• You cannot assign both COAXIAL and OPTICAL jacks to the same input source.
■
Display Set
Configures the settings related to the front display and TV screen display.
❑
Front Panel Display
Configures the front display settings.
Dimmer
Adjusts the brightness of the front display.
Setting range
-4 ~ 0 (higher to brighten)
Default
0
Scroll
Sets the scrolling manner of the front display.
The display scrolls automatically if the text exceeds 14 characters.
Settings
Off (default) Does not set this unit to standby mode automatically.
4 Hours, 8 Hours,
12 Hours Sets this unit to standby mode when you have not operated this unit for the
specified time.
Continue (default) Sets the display to scroll continuously.
Once
Sets the display to scroll all characters once and then halt scrolling for
display of the first 14 characters.