manualshive.com logo in svg

Yamaha RX-A1010, Owner'S Manual, Page: 109 / 188

Share
Download
Yamaha RX-A1010 Owner'S Manual Download Page 109

En

108

■ 

Dynamic Range

Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and 
DTS signals) playback.

Settings

■ 

Max Volume

Sets the maximum volume so that sound is not too loud.

Setting range

-30.0dB ~ +15.0dB (5.0dB steps), +16.5dB

Default

+16.5dB

■ 

Initial Volume

Sets the initial volume for when this receiver is turned on.

Settings

■ 

Pure Direct Mode

Selects whether to output video signals during the Pure Direct mode (p.54).

Settings

■ 

Adaptive DSP Level

Selects whether to automatically adjust the CINEMA DSP effect level in conjunction with 
volume adjustments.

Settings

Video

Configures the video output settings.

■ 

Analog to Analog Conversion

Enables/disables the video conversion (p.136) between the analog video jacks 
(COMPONENT VIDEO, S VIDEO and VIDEO).

Settings

• This function does not work when “Monitor Out Assign” (p.112) is set to “Zone2”.

• This unit does not convert 480-line and 576-line video signals interchangeably.

• 480p/576p-, 1080i- and 720p-resolution video signals cannot be output from the S VIDEO and VIDEO 

jacks (p.136).

Maximum (default)

Produces audio without adjusting the dynamic range.

Standard

Optimizes the dynamic range for regular home use.

Minimum/Auto

Sets the dynamic range to make clear sound even at night or at low 
volumes.
When playing back Dolby TrueHD signals, the dynamic range is 
automatically adjusted based on the input signal information.

Off (default)

Sets at the level when this unit last entered standby mode.

On

Sets at Mute, or -80.0dB ~ +16.5dB (0.5dB steps). (This setting works 
only when “Max Volume” is set higher.)

Auto (default)

Automatically outputs video signals when any videos are input from the 
selected input source or an input source that can be operated with the 
on-screen display is selected. When no video signals are input, the wall 
paper is displayed.

Video Off

Does not output video signals including the wall paper.

Off

Does not adjust the effect level automatically.

On (default)

Adjusts the effect level automatically.

Off

Disables the video conversion between the analog video jacks.

On (default)

Enables the video conversion between the analog video jacks.
Converted video signals are output from the MONITOR OUT jacks only.

Summary of Contents for RX-A1010





























































































































































































Reviews:

No comments