Yamaha RSio64-D, Owner'S Manual

Page: 19 / 30

Owner’s Manual
19
Other f u nctions
Other functions
Remote control
The same operations performed from the RSio64-D’s front
panel, such as turning SRC on/off, can be performed from
a device that supports remote control.
NOTE
For the latest information a b o u t remote control compati b le
de v ices, refer to the Yamaha Pro A u dio w e b site:
http:// www .yamahaproa u dio.com/
Remote controllable parameters
* DANTE PATCH: Specifies w hich channels of the CL/QL series
console are inp u t to w hich of the RSio64-D’s Dante 1–64 chan-
nels.
IDENTIFY
From a Yamaha CL/QL series console, from R Remote V3,
or from Dante Controller, you can identify a specific
RSio64-D unit from among multiple network-connected
devices. When you specify the IDENTIFY operation, all
front panel indicators on that unit except for the POWER
(INT/EXT) indicator will flash for ten seconds.
Panel lock
You can lock the panel to prevent unintended changes and
operations.
While the lock is engaged, all controllers on the front panel
are inoperable. To engage the lock, press and hold the
SLOT 1 and SLOT 4 [SRC] keys for at least 3 seconds. All
front panel indicators (except the power indicator) flash,
and operation is locked. To disengage the lock, press and
hold the SLOT 1 and SLOT 4 [SRC] keys for at least 3
seconds.
NOTE
• If yo u t u rn off the po w er w hile panel lock is engaged, panel
lock w ill still b e engaged the next time the po w er is t u rned
on.
• E v en if the front panel is locked, yo u can u se remote control
to make changes to the settings.
Parameter Description
SRC ON/OFF T u rns SRC on or off.
WORD CLOCK
Selects the so u rce u sed as the mas-
ter clock.
USER PATTERN
Lets yo u specify the u ser ro u ting pat-
tern.
DANTE PATCH* Lets yo u change the Dante patch.
ROUTING PATTERN Displays the pattern n u m b er.
SRC SOURCE CLOCK Sho w s the so u rce u sed b y the SRC.
POWER INT/EXT Sho w s the po w er s u pply stat u s.
SYSTEM/SYNC STATUS Sho w s the system sync stat u s.
DEVICE LABEL
Sho w s the UNIT ID/de v ice name
(la b el).
Press sim u ltaneo u sly for
at least three seconds