14
Owner’s Manual
Connections
Connections
Installing a Mini-YGDAI card
Before you install I/O cards in slots 1–4, you must check the
Yamaha website to determine whether the card is
compatible with the RSio64-D, and to verify the total
number of Yamaha or third-party cards that can be
installed in combination with that card.
Yamaha website:
http://www.yamahaproaudio.com/
To install an optional mini-YGDAI card, proceed as
follows.
1.
Make sure that the power is turned off.
CAUTION
Before installing a Mini-YGDAI I/O card in this
u
nit, yo
u
m
u
st
t
u
rn off the po
w
er of this
u
nit and the po
w
er of the external
po
w
er s
u
pply. Yo
u
m
u
st also
v
erify that the SLOT ACTIVE
indicator is
u
nlit. Malf
u
nctions or electrical shock may occ
u
r
if yo
u
fail to o
b
ser
v
e this ca
u
tion.
2.
Loosen the screws that hold the slot cover in
place, and remove the slot cover.
Keep the removed slot cover and screws in a safe place.
3.
Align the two edges of the card with the guide
rails inside the slot, and insert the card into the
slot.
Push the card all the way into the slot until the
connector of the card is correctly inserted into the
connector inside the slot.
4.
Secure the card using the screws that are
attached to the card.
If the card is not secured, malfunction or faulty
operation may occur.
About Dante
Dante is a network audio protocol developed by Audinate.
It is designed to deliver multi-channel audio signals at
various sampling and bit rates, as well as device control
signals over a Gigabit Ethernet (GbE) network.
Visit the Audinate website for more details on Dante:
http://www.audinate.com/
More information on Dante is also posted on the Yamaha
Pro Audio website:
http://www.yamahaproaudio.com/
Slot co
v
er
Card
Summary of Contents for RSio64-D
Page 27: ...Owner s Manual 169 ...
Page 29: ...MEMO ...
