8-38
1. Lift up the shroud.
2. Remove the right side cover
1
.
3. Unhook the latch
2
.
4. Loosen the clamp screws
3
.
5. Slide the oil tank breather hose clamp
4
away from
the air filter case, and then disconnect the oil tank
breather hose
5
.
6. Slide the crankcase breather hose clamp
6
up, and
then disconnect the crankcase breather hose
7
from
the engine.
7. Lift up the air filter case, slide the crankcase breather
hose clamp
8
down, disconnect the crankcase
breather hose from the air filter case, and then
remove the air filter case.
8. Disconnect the negative battery lead.
9. Replace the blown fuse with one of the proper
amperage.
10. Connect the negative battery lead.
11. Install the air filter case by reversing the removal
steps.
NOTE:
@
When installing the air filter case, connect the crankcase
breather hose to the air filter case first, and then connect
it to the engine.
@
CAUTION:
@
Be sure to connect the breather hoses securely when
installing the air filter case.
@
NOTE:
@
If the fuse immediately blows again, ask a Yamaha
dealer to inspect the snowmobile.
@
E_8gg.book Page 38 Thursday, March 16, 2006 4:23 PM
Summary of Contents for RS90GTW
