8-25
WARNING
@
This shock absorber contains highly pressurized
nitrogen gas. It could explode by improper handling,
causing injury, or property damage.
●
Do not tamper with or attempt to open the shock
absorber.
●
Do not subject the shock absorber to an open
flame or other high heat source, which could
cause it to explode.
●
Do not deform or damage the shock absorber in
any way.
●
Do not dispose of a worn or damaged shock
absorber by yourself. Take the unit to a Yamaha
dealer.
@
ESU04045
Adjusting the rear suspension spring preload
The rear suspension spring preload can be adjusted by
turning the spring preload adjuster
1
on the shock
absorber (RS90R/RS90GT/RSG90/RSG90GT) or each
shock absorber (RS90N/RS90NR/RS90M/RS90MS).
For RS90N/RS90NR
CD-17E
For RS90M/RS90MS
CD-13E
A
Spring seat length*
Standard
Increased
←
→
Decreased
Preload
Harder
←
→
Softer
È
a
Length (front)
Maximum
123.5 mm
(4.86 in)
113.5 mm
(4.47 in)
Minimum
107.5 mm
(4.23 in)
∗
The spring seat length changes approximately 1.5 mm (0.06 in) with
each full turn of the adjuster.
B
Spring adjuster position
1
2
3
4
5
Preload
Soft
Hard
É
Standard (front)
3
E_8gg.book Page 25 Thursday, March 16, 2006 4:23 PM
Summary of Contents for RS90GTW
