STEP 1
•Keep trailer strapped to
pallet for safety
•Remove the tongue
assembly from the box stand
Tools Required:
•WD-40
•3/4” wrench
•3/4” socket wrench
•9/16” wrench
•5/32” allen wrench
Woolly Bear
Assembly Instructions
STEP 2
•Insert the tongue into the
main chassis
•Install two through bolts
with nuts on the sides.
(torque to
80 lb-ft
)
•Install the black bolt on
bottom.
(flip the page for details)
STEP 3
•Rotate the tongue jack down
•Use the crank to raise the
jack. Remove the box stand
•Unstrap the trailer from
pallet and roll off pallet.
•Chock wheels
STEP 4
•Use
9/16”
socket wrench for
nylocks, and
5/32”
allen for bolts
•Install the risers in desired
position
(Refer to diagram
for recommended riser
placement for weight
distribution.)
(flip the page for details)
page 1/2
