Operation
34
●
Reduce speed and avoid sharp turning
when operating the snowmobile in re-
verse.
1.
To select the desired operating position,
pull the shift lever out, slide it to “FWD” or
to “REV” until it stops, and then release it.
NOTICE:
Do not shift from “FWD” to
“REV” or from “REV” to “FWD” while
the snowmobile is moving, as the
drive train could be damaged.
[ECS00811]
TIP
The reverse buzzer beeps while the shift lever
is in reverse.
2.
Release the parking brake by moving the
parking brake lever to the right.
3.
Press the throttle lever slowly to move the
snowmobile.
4.
Turn the handlebar in the desired direc-
tion.
5.
Squeeze the brake lever to stop the
snowmobile.
6.
Apply the parking brake by moving the
parking brake lever to the left.
ESU11411
Stopping the engine
●
Turn the main switch to the off position to
stop the engine.
●
Push down the engine stop switch to stop
the engine in an emergency.
1. Pull out.
2. Slide to “FWD” (forward).
3. Release.
1. Pull out.
2. Slide to “REV” (reverse).
3. Release.
1. Off
U8ET14E0.book Page 34 Thursday, April 10, 2008 9:47 AM
