manualshive.com logo in svg

Yamaha RS Venture RST90Y, Owner'S Manual

The Yamaha RS Venture RST90Y Owner's Manual is available for free download on our website. This comprehensive manual provides users with detailed instructions, troubleshooting tips, and maintenance guidelines for their Yamaha RS Venture RST90Y. Take advantage of this valuable resource to ensure optimal performance and longevity of your product.

Share
Download
background image

Control functions

11

Fuel meter

The display segments of the fuel meter disap-
pear towards “E” (Empty) as the fuel level de-
creases. When only one segment is left near
“E”, the fuel level warning indicator and the
warning light come on.

If the fuel level warning indicator and the
warning light come on, refuel as soon as pos-
sible.

TIP

The snowmobile must be stopped on a level
surface to obtain an accurate fuel meter read-
ing, since the reading changes according to
the movement and inclination of the snowmo-
bile.

Grip/thumb warmer level indicator

When the grip warmer adjustment switch is
pressed, the grip warmer indicator comes on
and the display switches to the grip warmer
level.
When the thumb warmer adjustment switch is
pressed, the thumb warmer indicator comes
on and the display switches to the thumb
warmer level.
See  “Grip/thumb warmer adjustment switch”
on page 14 for detailed information.

1. Fuel meter and grip/thumb warmer level in-

dicator

1. Fuel level warning indicator “

”

2. Warning light “

”

1. Grip warmer indicator “

”

2. Thumb warmer indicator “

”

1. Grip warmer adjustment switch

U8ET14E0.book  Page 11  Thursday, April 10, 2008  9:47 AM

Summary of Contents for RS Venture RST90Y

























































































Reviews:

No comments

Related manuals for RS Venture RST90Y

Brands by name

Popular brands

Load more brands