manualshive.com logo in svg

Yamaha RS Venture RST90Y, Owner'S Manual

The Yamaha RS Venture RST90Y Owner's Manual is available for free download on our website. This comprehensive manual provides users with detailed instructions, troubleshooting tips, and maintenance guidelines for their Yamaha RS Venture RST90Y. Take advantage of this valuable resource to ensure optimal performance and longevity of your product.

Share
Download
background image

Operation

31

risk of an accident. Do not try steeper or
more difficult inclines until you have de-
veloped your skill on gentle slopes.

You should practice first on gentle slopes. Try
more difficult climbs only after you have de-
veloped your skill. As you approach a hill, ac-
celerate before you start the climb, and then
reduce the throttle to prevent track slippage. It
is also important to keep your weight on the
uphill side at all times. On climbs straight up
the hill, this can be accomplished by leaning
forward and, on steeper inclines, standing on
the running boards and leaning forward over
the handlebar. (Also see “Traversing a
slope”.)

Slow down as you reach the crest of the hill,
and be prepared to react to obstacles, sharp
drops, or other vehicles or people which may
be on the other side. If you are unable to con-
tinue up a hill, do not spin the track. Stop the
engine and set the parking brake. Then pull
the rear of the snowmobile around to point the
snowmobile back down the hill. When the
snowmobile is pointed downhill, mount your
snowmobile from the uphill side. Restart the
engine, release the parking brake, and de-
scend the hill.

Riding downhill

WARNING

EWS00240

Use extra caution when applying the brake
during a descent. Excessive braking will
cause the drive track to lock, causing a
loss of control.

When riding downhill, keep speed to a mini-
mum. It is important to apply just enough
throttle to keep the clutch engaged while de-
scending the hill. This will allow you to use en-
gine compression to help slow the
snowmobile, and to keep the snowmobile
from rolling freely down the hill. Also apply the
brake frequently, with light pressure.

Traversing a slope

WARNING

EWS00251

Driving across the face of a slope (“side-
hilling”) can lead to overturn or loss of
control if proper techniques are not used.
Follow these instructions to reduce your
risk of an accident. Do not try steeper or
more difficult inclines until you have de-
veloped your skill on gentle slopes.

Traversing a slope requires you to properly
position your weight to maintain proper bal-
ance. As you travel across the slope, lean
your body to position your weight towards the
uphill side. A recommended riding position is
to kneel with the knee of your downhill leg on

U8ET14E0.book  Page 31  Thursday, April 10, 2008  9:47 AM

Summary of Contents for RS Venture RST90Y

























































































Reviews:

No comments

Related manuals for RS Venture RST90Y

Brands by name

Popular brands

Load more brands