Yamaha Road Star XV17ASX Owner'S Manual Download Page 68 | Manualshive

Page: 68 / 110

background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-22

6

NOTE:

These limits may be different by regula-
tion from country to country. If so, con-
form to the limits specified by the
regulations of your own country.

WARNING

EWA10580

●

It is dangerous to ride with a
worn-out tire. When a tire tread
begins to show crosswise lines,
have a Yamaha dealer replace
the tire immediately.

●

The replacement of all wheel-
and brake-related parts, includ-
ing the tires, should be left to a
Yamaha dealer, who has the
necessary professional knowl-
edge and experience.

EAU21940

Spoke wheels

To maximize the performance, durabil-
ity, and safe operation of your motor-
cycle, note the following points
regarding the specified wheels.

●

The wheel rims should be checked
for cracks, bends or warpage, and
the spokes for looseness or dam-
age before each ride. If any dam-
age is found, have a Yamaha
dealer replace the wheel. Do not
attempt even the smallest repair to
the wheel. A deformed or cracked
wheel must be replaced.

●

The wheel should be balanced
whenever either the tire or wheel
has been changed or replaced. An
unbalanced wheel can result in
poor performance, adverse han-
dling characteristics, and a short-
ened tire life.

●

Ride at moderate speeds after
changing a tire since the tire sur-
face must first be “broken in” for it
to develop its optimal characteris-
tics.

Front tire:

Size:

130/90-16M/C 67H

Manufacturer/model:

XV17ASX BRIDGE-
STONE/G703N
XV17ASXC BRIDGE-
STONE/G703N
XV17ATSX BRIDGE-
STONE/G703N
XV17ATSXC BRIDGE-
STONE/G703N
XV17AWX BRIDGE-
STONE/G703N
XV17AWXC BRIDGE-
STONE/G703N

Rear tire:

Size:

150/80B16M/C 71H

Manufacturer/model:

XV17ASX BRIDGE-
STONE/G702N
XV17ASXC BRIDGE-
STONE/G702N
XV17ATSX BRIDGE-
STONE/G702N
XV17ATSXC BRIDGE-
STONE/G702N
XV17AWX BRIDGE-
STONE/G702N
XV17AWXC BRIDGE-
STONE/G702N

Minimum tire tread depth (front and
rear):

1.0 mm (0.04 in)

U5VN14E0.book Page 22 Tuesday, January 22, 2008 1:34 PM

«
...
66
67
68
69
70
...
»

Summary of Contents for Road Star XV17ASX















































































































Reviews:

No comments

Related manuals for Road Star XV17ASX

Brand: Dynojet Pages: 2

Brand: KDX Pages: 7

Brand: RDMOTO Pages: 2

Brand: DUCATI Performance Pages: 9

Stealth Air Cleaner Kit

Brand: S&S Cycle Pages: 4

Brand: Ducati Pages: 77

Operation and Instruction Manua

Brand: Takegawa Pages: 9

Brand: hepco & becker Pages: 5

Brand: Yamaha Pages: 94

Star XVS13CG 2015

Brand: Yamaha Pages: 98

Star XV250G 2015

Brand: Yamaha Pages: 88

Star XVS13CTD 2012

Brand: Yamaha Pages: 104

Brand: Yamaha Pages: 104

Star XV250H 2016

Brand: Yamaha Pages: 98

Brand: Yamaha Pages: 98

Brand: Kemppi Pages: 10

Brand: Rally-Raid Pages: 2

Brand: Yamaha Pages: 109

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands