Yamaha Road Star XV17ASX Owner'S Manual Download Page 32

Page: 32 / 110

INSTRUMENT AND CONTROL FUNCTIONS

3-12

EAU14320

Helmet holder

The helmet holder is located under the
rider seat.

To secure a helmet to the helmet
holder

1. Remove the rider seat. (See page

3-11.)

2. Attach the helmet to the helmet

holder, and then securely install
the seat.

WARNING

EWA10160

Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.

To release the helmet from the hel-
met holder

Remove the rider seat, remove the hel-
met from the helmet holder, and then
install the seat.

EAU14580

Windshield
[XV17ATX(C)/XV17ATSX(C)]

To suit the rider’s preference, the wind-
shield angle can be adjusted and the
height can be changed to one of two
positions.

To adjust the windshield angle

1. Loosen the bolts on each side of

the windshield.

2. Move the windshield to the desired

angle.

3. Tighten the bolts to the specified

torque.

1. Helmet holder

1. Windshield

2. Bolt

U5VN14E0.book Page 12 Tuesday, January 22, 2008 1:34 PM

Summary of Contents for Road Star XV17ASX















































































































Search results

Summary of Contents for Road Star XV17ASX

Reviews:

Related manuals for Road Star XV17ASX

Brands by name

Popular brands

Yamaha Road Star XV17ASX, Owner'S Manual

Search results

Summary of Contents for Road Star XV17ASX

Reviews:

Related manuals for Road Star XV17ASX

Brands by name

Popular brands