Yamaha Road Star XV17ASX, Owner'S Manual

Page: 24 / 110

INSTRUMENT AND CONTROL FUNCTIONS
3-4
3
Fuel gauge
The fuel gauge indicates the amount of
fuel in the fuel tank. The needle moves
towards “E” (Empty) as the fuel level
decreases. When the needle reaches
“E”, approximately 3.4 L (0.90 US gal)
(0.75 Imp.gal) remain in the fuel tank. If
this occurs, refuel as soon as possible.
When the key is turned to “ON”, the fuel
gauge needle will sweep once across
the fuel level range and then return to
the current amount in order to test the
electrical circuit.
Odometer, tripmeters and fuel re-
serve tripmeter
Push the “ ” side of the “SELECT”
switch to switch the display between
the odometer mode “ODO”, the tripme-
ter modes “TRIP A” and “TRIP B” in the
following order:
ODO
→
TRIP A
→
TRIP B
→
ODO
NOTE:
Push the “ ” side of the “SELECT”
switch to switch the display in the re-
verse order.
If the fuel level warning light comes on
(see page 3-2), the odometer display
will automatically change to the fuel re-
serve tripmeter mode “F-TRIP” and
start counting the distance traveled
from that point. In that case, push
the “
” side of the “SELECT” switch to
switch the display between the various
tripmeter and odometer modes in the
following order:
F-TRIP
→
TRIP A
→
TRIP B
→
ODO
→
F-TRIP
NOTE:
Push the “ ” side of the “SELECT”
switch to switch the display in the re-
verse order.
To reset a tripmeter, select it by push-
ing the “
” or “ ” side of the “SE-
LECT” switch, and then push the
“RESET” switch for at least one sec-
ond. If you do not reset the fuel reserve
tripmeter manually, it will reset itself au-
tomatically, and the display will return
to the prior mode after refueling and
traveling 5 km (3 mi).
1. Fuel gauge
1
1. Odometer/tripmeter/fuel reserve tripmeter
1
U5VN14E0.book Page 4 Tuesday, January 22, 2008 1:34 PM