INSTRUMENT AND CONTROL FUNCTIONS
3-3
3
To reset a tripmeter, select it by push-
ing the mode button (left), and then
hold down the set button (right) for at
least one second. The tripmeters can
be used to estimate the distance that
can be traveled with a full tank of fuel.
This information will enable you to plan
future fuel stops.
NOTE:
This model is not equipped with a ta-
chometer; however, it has a built-in en-
gine speed limiter, which prevents the
engine speed from exceeding approxi-
mately 4400 r/min.
EAU12070
Self-diagnosis device
This model is equipped with a self-diag-
nosis device for various electrical cir-
cuits.
If any of those circuits are defective, the
engine trouble warning light will come
on or the fuel level warning light will
flash. If this occurs, have a Yamaha
dealer check the vehicle.
CAUTION:
ECA10040
When the tachometer displays an er-
ror code, the vehicle should be
checked as soon as possible in or-
der to avoid engine damage.
EAU12140
Fuel gauge
The fuel gauge indicates the amount of
fuel in the fuel tank. The needle moves
towards “E” (Empty) as the fuel level
decreases. When the needle reaches
“E”, refuel as soon as possible.
NOTE:
Do not allow the fuel tank to empty itself
completely.
U5JA26E0.book Page 3 Tuesday, May 18, 2004 3:32 PM
ProCarManuals.com