background image

PERIODIC MAINTENANCE AND MINOR REPAIR

6-20

6

indicator grooves have almost disap-
peared, have a Yamaha dealer replace
the brake pads as a set.

EAU22470

Rear brake pads

Each rear brake pad is provided with a
wear indicator groove, which allows
you to check the brake pad wear with-
out having to disassemble the brake.
To check the brake pad wear, check
the wear indicator groove. If a brake
pad has worn to the point that the wear
indicator groove has almost disap-
peared, have a Yamaha dealer replace
the brake pads as a set.

EAU22580

Checking the brake fluid level 

Front brake

Rear brake

Insufficient brake fluid may allow air to
enter the brake system, possibly caus-
ing it to become ineffective.

Before riding, check that the brake fluid
is above the minimum level mark and
replenish if necessary. A low brake fluid
level may indicate worn brake pads
and/or brake system leakage. If the
brake fluid level is low, be sure to check
the brake pads for wear and the brake
system for leakage.
Observe these precautions:

When checking the fluid level,
make sure that the top of the brake
fluid reservoir is level.

Use only the recommended quality
brake fluid, otherwise the rubber
seals may deteriorate, causing
leakage and poor braking perfor-
mance.

Refill with the same type of brake
fluid. Mixing fluids may result in a
harmful chemical reaction and
lead to poor braking performance.

1. Brake pad wear indicator groove

1. Minimum level mark

1. Minimum level mark

Recommended brake fluid:

DOT 4

U5JA26E0.book  Page 20  Tuesday, May 18, 2004  3:32 PM

ProCarManuals.com

Summary of Contents for Road Star XV1600AT 2004





















































































Reviews: