Yamaha RM1x, Service Manual

Page: 31 / 54

41
RM1x
●
Monitor
No Data When a job is executed, this will appear if the selected track or area contains no data,
making the job invalid. Re-select the area.
Illegal Input This will appear in response to inappropriate operation or input. Check your input
method.
Illegal Track Number An unavailable or otherwise improper track number has been specified. Select a
different track.
Illegal Phrase Number An unavailable or otherwise improper phrase number has been specified. Select a
different phrase.
Illegal Measure An unavailable or otherwise improper measure number has been specified. Select a
different measure number.
Illegal Check Box This message will appear if no check boxes are checked in any of the corresponding
track jobs. At least one check box must be checked.
No F7 (End of Exc.) This message indicates that no “End of Exclusive” byte (F7) was included with a MIDI
exclusive data entry or edit. Be sure to include F7.
Preset Phrase This will appear when you attempt to edit a Preset Phrase. If you wish to edit a preset
phrase, you must first copy it to a User Phrase.
Preset Pattern This will appear when you attempt to record to a Preset Pattern. You cannot record to
Preset Patterns.
Pattern Length Mismatch A job has resulted in a pattern having more than the maximum of 256 measures.
Phrase Number Overflow All available user phrases (256 maximum) have been used up when recording,
executing a job, or editing.
●
System
Backup Battery Low This will appear when the internal backup battery of the RM1x has run down. Replace the
battery to a new one.
Memory Full This will appear when internal memory is full and it is not possible to record, edit, execute
a job, receive MIDI, or load from floppy disk. Delete unneeded songs, patterns, or user
phrases, and try the operation once again.
Factory Set After the power is switched ON, a system diagnosis is run on the RM1x’s system. If the
diagnosis finds the RAM to be defective, this message will appear and the memory will be
reset to its original factory settings. Data for User Song, User Patterns, and User Phrases
will all be eliminated.
Memory Protect You have attempted to execute a recording, editing, or job function when the UTILITY
mode Memory Protect function is ON.
●
MIDI
Exc. Adrs Error This appears when the received Exclusive data contains an address error.
Exc. Data Error This appears when the received Exclusive data contains a data size error.
MIDI Buffer Full This will appear when the MIDI reception buffer of the RM1x has filled up, and
processing is not possible. Try decreasing the amount of data or increasing the
interval time and transmit the data once again.