Yamaha RM1x, Service Manual

Page: 38 / 54

52
RM1x
(3-4) SYSTEM REAL TIME MESSAGE
Not recorded as Sequence Data.
(3-4-1) TIMING CLOCK
STATUS 11111000(F8H)
You can select whether the internal clock will be used as the Timing Clock, or whether Timing Clock
messages from the MIDI IN will be used.
Transmission/reception can be turned On/Off.
(3-4-2) START
STATUS 11111010(FAH)
Transmission/Reception can be turned On/Off.
(3-4-3) CONTINUE
STATUS 11111011(FBH)
Transmission/Reception can be turned On/Off.
(3-4-4) STOP
STATUS 11111100(FCH)
Transmission/Reception can be turned On/Off.
(3-5) SYSTEM EXCLUSIVE MESSAGE
All System Exclusive Messages are recorded and played back.
Even if time intervals existed within the actual data that was received, the entire message between F0
and F7 will be recorded into one timing location.
For playback, an interval time can be specified for each 1K bytes.
(3-6) SECTION CONTROL
11110000 F0 Exclusive status
01000011 43 YAMAHA ID
01111110 7E Style
00000000 00 Section Control
0sssssss ss Section
0ddddddd dd On/Off
11110111 F7 End of Exclusive
ss=08H-0FH, dd=on is received, and the PATTERN will be changed to the RM1x's sections A - P
respectively.
<Table 1-1> Parmeter Base Address
Parameter Change
Address
(H)
(M) (L) Description
SYSTEM 00 00 00 System
00 00 7E XG System On
00 00 7F All Parameter Reset
INFORMATION 01 00 00 System Information
EFFECT 1 02 01 00 Effect1(Reverb,Chorus,Variation )
02 40 00 Reserved
: : : :
MULTI PART 08 00 00 Multi Part 1
:
08 0F 00 Multi Part 16
08 10 00 Reserved
: : : :
<Table 1-2> MIDI Parameter Change table ( SYSTEM )
Address Size Data Parameter Name Description Default
(H) (H) (H) value(H)
00 00 00 4 0000 Master Tune -102.4..+102.3[cent] 00 04 00 00
01 ..07FF 1st bit3-0
→
bit15-12 (0400)
02 2nd bit3-0
→
bit11-8 (not reset by XG or GM on)
03 3rd bit3-0
→
bit7-4 (not reset by XG or GM on)
4th bit3-0
→
bit3-0
04 1 00..7F Master Volume 0..127 7F
05 1 Not Used
06 1 28..58 Transpose -24..+24[semitones] 40
7D Not Used
7E 00 XG System On 00=XG Sytem on (receive only)
7F 00 All Parameter Reset 00=on (receive only)
TOTAL SIZE 06
<Table 1-3> MIDI Parameter Change table ( EFFECT 1)
Address Size Data Parameter Name Description Default
(H) (H) (H) value(H)
02 01 00 2 00..7F Reverb Type MSB Refer to Ef. Parameter List 01(=HALL1)
00..7F Reverb Type LSB 00 : basic type 00
02 1 00..7F Reverb Parameter 1 Refer to Ef. Parameter List depends on Reverb type
03 1 00..7F Reverb Parameter 2 Refer to Ef. Parameter List depends on Reverb type
04 1 00..7F Reverb Parameter 3 Refer to Ef. Parameter List depends on Reverb type
05 1 00..7F Reverb Parameter 4 Refer to Ef. Parameter List depends on Reverb type
06 1 00..7F Reverb Parameter 5 Refer to Ef. Parameter List depends on Reverb type
07 1 00..7F Reverb Parameter 6 Refer to Ef. Parameter List depends on Reverb type
08 1 00..7F Reverb Parameter 7 Refer to Ef. Parameter List depends on Reverb type
09 1 00..7F Reverb Parameter 8 Refer to Ef. Parameter List depends on Reverb type
0A 1 00..7F Reverb Parameter 9 Refer to Ef. Parameter List depends on Reverb type
0B 1 00..7F Reverb Parameter 10 Refer to Ef. Parameter List depends on Reverb type
0C 1 00..7F Reverb Return -°..0..+6dB(0..96..127) 40
0D 1 01..7F Reverb Pan L63..C..R63(1..64..127) 40
TOTAL SIZE 0E
(3-7) MIDI TIME CODE(QUARTER FRAME MESSAGE)
STATUS 11110001(F1H)
0nnnxxxx
If MTC is selected as the Timing Clock, MTC Quarter Frame messages will be received.
(3-8) MIDI MACHINE CONTROL
These will be transmitted if MTC is selected as the Timing Clock.
(3-8-1) STOP(MCS)
11110000 F0 Exclusive status
01111111 7F RealTime Header
01111111 7F device ID
00000110 06 MMC Command Message
00000001 01 STOP(MCS)
11110111 F7 End of Exclusive
Transmitted when the STOP button is pressed.
(3-8-2) DEFERRED PLAY(MCS)
11110000 F0 Exclusive status
01111111 7F RealTime Header
01111111 7F device ID
00000110 06 MMC Command Message
00000011 03 DEFERRED PLAY(MCS)
11110111 F7 End of Exclusive
Transmitted when the PLAY button is pressed.
(3-8-3) LOCATE(MCP)
11110000 F0 Exclusive status
01111111 7F RealTime Header
01111111 7F device ID
00000110 06 MMC Command Message
01000100 44 LOCATE(MCP)
00000110 06 Byte Count
00000001 01 "TERGET" Sub Command
0tthhhhh hr standard time specification with sub-frames
0cmmmmmm mn
0kssssss sc
0gifffff fr
0bbbbbbb ff
11110111 F7 End of Exclusive
Transmitted when you move between measures in the SONG mode.