11
Preparations
Turning on the power
Plug the power cable into the wall outlet
and press
A
(power)/
CONNECT
.
•
The unit turns on.
•
Press
A
(power)/
CONNECT
again to turn off (standby
mode).
The unit can be set to display the clock or the network connection status when it is in standby (network
standby).
If network standby is turned off, the unit can reduce power consumption without displaying the clock
(eco standby). For details, see the table on the right.
Network standby can be turned on /off in the following procedure.
1
While pressing
ALARM
of the unit, plug the power cable into an outlet.
2
Press and hold
ALARM
.
•
The front panel display shows “ON” or “OFF.”
A
(power)/
CONNECT
Network standby
Status in network standby/eco standby
•
When you turn on the unit for the first time after
purchase, the Wi-Fi indicator blinks and the unit
automatically starts to search iOS device (
•
When the unit is turned on, a Source indicator
(
P.7) lights up.
Network
standby
Eco
standby
Enable/disable the alarm
Yes
No
Control from the app
Yes
No
Clock display
Yes
No
Network connection
Yes
No
Bluetooth
connection
Yes
No
•
When the auto standby is on (default setting), the
unit will automatically go into the standby state
under the following conditions.
-
When the unit produces no sound of audio
input and is not operated for about 20 minutes
at selecting
Bluetooth
or NET as the source.
-
When the unit has passed for 8 hours in the FM/
DAB reception.
