8-13
EBU14180
Engine oil
Engine oil level measurement
1. Place the ATV on a level surface.
2. Warm up the engine for several minutes
and stop it.
3. Remove the dipstick and wipe it off with a
clean rag. Insert the dipstick in the filler
hole without screwing it in.
NOTE:
Wait a few minutes until the oil level settles
before checking.
4. Remove the dipstick and inspect the oil
level.
5. The oil level should be between the mini-
mum and maximum marks. If the level is
low, add oil to raise it to the specified level.
c
C
Be sure no foreign material enters the
crankcase.
q
w
e
1. Dipstick
2. Maximum level mark
3. Minimum level mark
1. Jauge
2. Repère de niveau maximum
3. Repère de niveau minimum
1. Varilla de medición
2. Marca de máximo
3. Marca de mínimo
5TH-9-62 8 4/8/03 9:05 PM Page 8-13
Summary of Contents for RAPTOR YFM80WS
