Yamaha Raptor YFM35RA Owner'S Manual Download

Page: 63 / 142

7-14

●

Shift your weight forward.

●

Never open the throttle suddenly or make
sudden gear changes. The ATV could flip
over backwards.

●

Never go over the top of any hill at high
speed. An obstacle, a sharp drop, or another
vehicle or person could be on the other side
of the hill.

●

Never attempt to turn the ATV around on any
hill until you have mastered the turning tech-
nique as described in the Owner’s Manual on
level ground. Be very careful when turning
on any hill.

●

Avoid crossing the side of a steep hill if pos-
sible. When crossing the side of a hill, shift
your weight to the uphill side of the ATV.

U1BS11E0.book Page 14 Monday, April 5, 2010 8:56 AM

Summary of Contents for Raptor YFM35RA















































































































































Search results

Summary of Contents for Raptor YFM35RA

Reviews:

Related manuals for Raptor YFM35RA

Brands by name

Popular brands

Yamaha Raptor YFM35RA, Owner'S Manual

Search results

Summary of Contents for Raptor YFM35RA

Reviews:

Related manuals for Raptor YFM35RA

Brands by name

Popular brands