manualshive.com logo in svg

Yamaha Raptor YFM35RA, Owner'S Manual

Share
Download
Yamaha Raptor YFM35RA Owner'S Manual Download Page 10

1-2

1

EBU17670

Read and understand all of the labels on your ATV. These labels contain important information for safe and
proper operation.
Never remove any labels from your ATV. If a label becomes difficult to read or comes off, request a replace-
ment label from your Yamaha dealer.

WARNING

Improper tire pressure or overloading can cause
loss of control.
Loss of control can result in severe injury or
death.

OPERATING TIRE PRESSURE : 

Set with tires cold

• Recommended

: Front

: 3.6 psi (25.0 kPa)

Rear

: 3.6 psi (25.0 kPa)

• Minimum

: Front

: 3.2 psi (22.0 kPa)

Rear

: 3.2 psi (22.0 kPa)

• Never set tire pressure below minimum.
  It could cause the tire to dislodge from the rim.

LOADING

• Maximum weight capacity : 220 lbs. (100 kg)
  Includes weight of operator, cargo and accessories.

5YT-2816M-U0

1

2

3

4

U1BS11E0.book  Page 2  Monday, April 5, 2010  8:56 AM

Summary of Contents for Raptor YFM35RA















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands