Yamaha R15M Owner'S Manual Download

Page: 44 / 100

Instrument an

control functions

5-23

2. Remove the key.

er seat

To remove the rider seat

1. Remove the passenger seat, and

then remove the hexagon wrench
located on the bottom of the seat.

2. Remove the bolts with the hexa-

gon wrench.

3. Lift the seat rearward and up to re-

move it.

To install the rider seat

1. Fit the slot in the seat onto the pro-

jection on the frame cross mem-
ber as shown, and then place the
seat in the original position.

2. Install the bolts with the hexagon

wrench.

3. Insert the hexagon wrench back

into its holder on the passenger
seat.

4. Install the passenger seat.

1. Rider seat cover

1. Hexagon wrench

1. Bolt
2. Quick fastener

ZAUE4542

1. Projection
2. Seat holder

ZAUE4544

UBNCEZE0.book Page 23 Monday, September 20, 2021 12:45 PM

Summary of Contents for R15M





































































































Search results

Summary of Contents for R15M

Reviews:

Related manuals for R15M

Brands by name

Popular brands

Yamaha R15M, Owner'S Manual

Search results

Summary of Contents for R15M

Reviews:

Related manuals for R15M

Brands by name

Popular brands