Yamaha R15M Owner'S Manual Download

Page: 41 / 100

Instrument an

control functions

5-20

EAUE1482

Fuel tank cap

To remove the fuel tank cap

1. Open the fuel tank cap lock cover.
2. Insert the key and turn it 1/4 turn

clockwise. The lock will be re-
leased and the fuel tank cap can
be removed.

To install the fuel tank cap

1. Push the fuel tank cap into posi-

tion with the key inserted.

2. Turn the key counterclockwise to

the original position, and then re-
move it.

3. Close the lock cover.

TIP

The fuel tank cap cannot be installed
unless the key is in the lock. In addi-
tion, the key cannot be removed if the
cap is not properly installed and
locked.

WARNING

EWA11142

Make sure that the fuel tank cap is
properly installe

efore ri

Leakin

fuel is a fire hazar

1. Front wheel sensor
2. Front wheel sensor rotor

1. Rear wheel sensor
2. Rear wheel sensor rotor

ZAUE4468

ZAUE4469

1. Fuel tank cap lock cover
2. Unlock.

ZAUE4470

UBNCEZE0.book Page 20 Monday, September 20, 2021 12:45 PM

Summary of Contents for R15M





































































































Search results

Summary of Contents for R15M

Reviews:

Related manuals for R15M

Brands by name

Popular brands

Yamaha R15M, Owner'S Manual

Search results

Summary of Contents for R15M

Reviews:

Related manuals for R15M

Brands by name

Popular brands