Instrument an
d
control functions
5-17
5
Push and briefly hold this switch down
to the start position “
” to crank the
engine with the starter.
TIP
See page 7-2 for further instruc-
tions before starting the engine for
the first time.
For certain models, the engine
warning light will come on when
the start switch is pushed, but this
does not indicate a malfunction.
EAUN2211
Hazar
d
li
g
hts switch “
/OFF”
The hazard lights (simultaneous flash-
ing of all turn signal lights) are used in
case of an emergency, such as to warn
other drivers when your vehicle is
stopped where it might be a traffic haz-
ard.
Set this switch to “
” to turn on the
hazard lights. To turn off the hazard
lights, set the switch to “OFF”.
NOTICE
ECA10062
Do not use the hazar
d
li
g
hts for an
exten
d
e
d
len
g
th of time with the en-
g
ine not runnin
g
, otherwise the
b
at-
tery may
d
ischar
g
e.
EAU78491
“TRIP/INFO” switch
This switch is used to make setting and
display changes in the multi-function
meter unit.
To use the “TRIP” switch, move the
“TRIP/INFO” switch in direction (a). To
use the “INFO” switch, move the
“TRIP/INFO” switch in direction (b).
EAU31642
Clutch lever
The clutch lever is located on the left
side of the handlebar. To disengage
the clutch, pull the lever toward the
handlebar grip. To engage the clutch,
release the lever. The lever should be
pulled rapidly and released slowly for
smooth clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the start-
ing circuit cut-off system. (See page
5-25.)
1. “TRIP/INFO” switch
1
ZAUE4465
(a)
(b)
1. Clutch lever
1
UBNCEZE0.book Page 17 Monday, September 20, 2021 12:45 PM
