CONTROLS AND FUNCTIONS
4
En
y
indicates buttons and controls that can also be used to
control Zone 2. For more information about Zone 2, see pages 45
and 46.
1
MAIN ZONE
A
Turns on this unit’s Main Zone unit or sets the Main Zone
to standby mode (see page 16).
In standby mode, this unit consumes a small amount of power to
receive infrared signals from the remote control.
2
MAIN ZONE indicator
Lights up as follows:
Brightly lit: Power is on
Dimly lit: Standby mode
The MAIN ZONE indicator is brightly lit while an iPhone/iPod is
charging.
3
SPEAKERS A/B
Turns on or off the speaker set connected to the
SPEAKERS A and/or SPEAKERS B terminals on the rear
panel each time the corresponding button is pressed (see
page 16).
4
DIMMER
Changes the brightness level of the front panel display.
Choose brightness from 3 levels by pressing this button
repeatedly.
y
This setting is retained even if you turn off this unit.
5
FM MODE/INFO
Changes the FM radio wave reception mode (stereo or
monaural) when TUNER is selected as the input source
(see page 21).
Changes the SIRIUS Satellite Radio information
displayed on the front panel display when SIRIUS is
selected as the input source (see page 34).
Changes the playback information displayed about the
song playing on the iPhone/iPod when DOCK is selected
as the input source (see page 36).
Playback information can only be displayed for an iPhone/iPod
that is connected using a Universal Dock for iPod.
6
MEMORY
Stores the current FM/AM station as a preset when
TUNER is selected as the input source (see page 23).
Stores the current SIRIUS channel as a preset when
SIRIUS is selected as the input source (see page 30).
7
CLEAR
Clears the current FM/AM preset station when TUNER is
selected as the input source (see page 24).
Clears the current SIRIUS preset channel when SIRIUS is
selected as the input source (see page 32).
8
Front panel display
Shows information about the operational status of this
unit.
CONTROLS AND FUNCTIONS
Front panel
(R-S700)
Note
Note
Note
