23
En
FM/AM TUNING
BA
S
IC
OPE
R
A
T
IO
N
You can manually register up to 40 FM/AM stations
(40 total). You can then easily recall any preset station by
selecting its preset number.
1
Tune in to the desired FM/AM station.
See pages 20 and 21 for tuning instructions.
2
Press MEMORY on the front panel.
“MANUAL PRESET” is displayed briefly on the
front panel display, and then the preset number to
which the station will be registered is displayed.
y
By holding down MEMORY on the front panel for more than
2 seconds, you can skip the following steps and automatically
register the selected station to an empty preset number (i.e., the
preset number following the last preset number used).
3
Press PRESET
j
/
i
on the front panel (or
PRESET
F
/
G
on the remote control) to
select the preset number to which the station
will be registered.
When you select a preset number to which no station
is registered, “EMPTY” is displayed. When you
select a preset number to which a station has already
been registered, the frequency of the station is
displayed.
y
You can also select a preset number using the numeric buttons on
the remote control.
4
Press MEMORY on the front panel.
When registration is complete, the display returns to
the original state.
y
To cancel registration, RETURN on the remote control or do not
perform any operations for about 30 seconds.
Manual station preset
MEMORY
PRESET
j
/
i
PRESET
F
/
G
RETURN
Numeric
buttons
Preset number
