background image

34 

En

LISTENING TO SIRIUS Satellite Radio™

Use this feature to display the SIRIUS Satellite Radio 
information on the front panel display.

If a status message or an error message is displayed on the front 
panel display, see “SIRIUS Satellite Radio™” on page 53.

1

Press FM MODE/INFO on the front panel (or 
INFO on the remote control) repeatedly to 
switch between the following SIRIUS Satellite 
Radio information display modes.

v

Back to “

CHANNEL

Display example (

ANTENNA

)

y

• If the SIRIUS Satellite Radio information contains a character 

that cannot be recognized by this unit, the character will be 
displayed as a space.

• When the antenna of the SiriusConnect tuner cannot receive the 

signals, “ACQUIRING” is displayed on the front panel display.

• When an information is unavailable, “––––” is displayed.
• To hold or release the displayed information, press ENTER on 

the remote control. While it is held, the “HOLD” indicator 
flashes on the front panel display.

Displaying the SIRIUS Satellite 
Radio™ information

Note

INFO

FM MODE/INFO

ENTER

CHANNEL

Channel number, channel name

CATEGORY

Channel category

ARTIST/SONG

Artist name, song title

COMPOSER

Composer name

ANTENNA

Antenna reception level

Summary of Contents for R-S700BL








































































Reviews: