Yamaha R-N303 Owner'S Manual Download

Page: 53 / 65

Troubleshooting

English

ADDITIONAL

INF

RMA

■

Bluetooth

Problem

Possible cause

Remedy

See

page

The unit cannot
connect to a

Bluetooth

device.

The “

Bluetooth

” setting in the settings

menu is “Off”.

Set the “

Bluetooth

” setting in the settings menu to

“On”.

The unit is connected to a different

Bluetooth

device.

Unpair the

Bluetooth

device that is currently

connected, and pair with the desired

Bluetooth

device.

The unit is too far away from the

Bluetooth

device.

Move the

Bluetooth

device closer to this unit.

—

A device emitting electromagnetic waves
(such as a microwave oven, a wireless
device and so on) are located nearby.

Do not use this unit near devices that emit
electromagnetic waves.

—

The

Bluetooth

device you are using does

not support the A2DP protocol.

Use a

Bluetooth

device that supports the A2DP

protocol.

The connection profile registered in the

Bluetooth

device is not functioning

correctly for some reason.

Delete the connection profile in the

Bluetooth

device,

and then connect the

Bluetooth

device to this unit.

The passkey on the

Bluetooth

adapter or

other device is set to a code besides
“0000”.

Use a

Bluetooth

device on which the passkey is set to

“0000”.

—

No sound can be
heard, or the sound
cuts off intermittently.

The volume on the

Bluetooth

device is too

low.

Raise the volume on the

Bluetooth

device.

—

The sound output on the

Bluetooth

device

is not set to this unit.

Select this unit as the output destination on the

Bluetooth

device.

The connection to the

Bluetooth

device is

cut off.

Connect with the

Bluetooth

device one more time.

The unit is too far away from the

Bluetooth

device.

Move the

Bluetooth

device near this unit.

—

A device emitting electromagnetic waves
(such as a microwave oven, a wireless
device and so on) is located nearby.

Do not use this unit near devices that emit
electromagnetic waves.

—

Summary of Contents for R-N303


































































Search results

Summary of Contents for R-N303

Reviews:

Related manuals for R-N303

Brands by name

Popular brands

Yamaha R-N303, Owner'S Manual

Search results

Summary of Contents for R-N303

Reviews:

Related manuals for R-N303

Brands by name

Popular brands