Yamaha R-N303 Owner'S Manual Download

Page: 45 / 65

Configuring various functions (SETUP menu)

English

NCED

ERA

■

Standby (Network Standby)

Selects whether the unit can be turned on from other
network devices (network standby).

■

Network Name

Edits the network name (the unit’s name on the network)
displayed on other network devices.

Select “Network Name”.

For information on selecting a menu option, refer to
the steps described on page 39.

Press ENTER to enter the name edit display.

Use the cursor keys (





) to select a

character and (





) to move the edit

position.

You can insert / delete a character, by pressing
PRESET

(insert) or PRESET

(delete).

To confirm the new name, press ENTER.

To exit from the menu, press SETUP.

■

Update (Network Update)

Updates the firmware via the network.

Bluetooth

Configures the

Bluetooth

settings.

■

On/Off

Enables/disables the

Bluetooth

function (p. 30).

■

Standby (

Bluetooth

Standby)

Selects whether to enable/disable the function that turns
on the unit from

Bluetooth

devices (

Bluetooth

standby). If

this function is set to “On”, the unit automatically turns on
when a connect operation is performed on the

Bluetooth

device.

Note

This setting is not available when “Standby (Network Standby)”
(p. 41) is set to “Off”.

Balance

Adjusting the sound output balance of the left and right
speakers to compensate for sound imbalance caused by
speaker locations or listening room condition.

Setting range

L+10 to R+10

Default

Center

Max Volume

Sets the maximum volume to prevent excessive loudness.

Setting range

1 to 99 (1step increments), Max

Default

Max

Off

Disables the network standby function.

Enables the network standby function.
(The unit consumes more power than when “Off”
is selected.)

Auto
(default)

Enables the network standby function. The unit
enters power-saving mode eight hours after it is
disconnected from the network.

With an advanced energy saving design, this product achieves
a low power consumption of not more than two watts when in
Network Standby mode.

Perform
Update

Starts the process to update the unit’s firmware.
For details, see “Updating the unit’s firmware”
(p. 45).

Version

Displays the version of the firmware installed on
the unit.

Displays the system ID number.

SP A

R-N303 XXXXXX

NET NAME

R-N303 (example)

SP A

R-N303 XXXXXX›

NET NAME

R-N303 (example)

Off

Disables the

Bluetooth

function.

On (default)

Enables the

Bluetooth

function. Immediately

after selecting the “On”, output of the network
source is paused.

Off

Disables the

Bluetooth

standby function.

On (default)

Enables the

Bluetooth

standby function. (The

unit consumes more power than when “Off” is
selected.)

Summary of Contents for R-N303


































































Search results

Summary of Contents for R-N303

Reviews:

Related manuals for R-N303

Brands by name

Popular brands

Yamaha R-N303, Owner'S Manual

Search results

Summary of Contents for R-N303

Reviews:

Related manuals for R-N303

Brands by name

Popular brands