Yamaha R-3 Owner'S Manual Download Page 71

Page: 71 / 98

Perio

ic maintenance an

justment

7-24

EAU22734

Chan

the

rake flui

Have a Yamaha dealer change the
brake fluid every 2 years. In addition,
have the seals of the master cylinders
and brake calipers, as well as the brake
hoses replaced at the intervals listed
below or sooner if they are damaged or
leaking.

Brake seals: every 2 years

Brake hoses: every 4 years

EAU22762

Drive chain slack

The drive chain slack should be
checked before each ride and adjusted
if necessary.

EAU2277G

To check the

rive chain slack

1. Place the motorcycle on the side-

stand.

TIP

When checking and adjusting the drive
chain slack, there should be no weight
on the motorcycle.

2. Shift the transmission into the

neutral position.

3. Measure the drive chain slack as

shown.

4. If the drive chain slack is incorrect,

adjust it as follows.

NOTICE:

Im-

proper

rive chain slack will

overloa

the en

ine as well as

other vital parts of the motorcy-
cle an

can lea

to chain slip-

e or

reaka

e. If the

rive

chain slack is more than , the
chain can

ama

e the frame,

swin

arm, an

other parts. To

prevent this from occurrin

keep the

rive chain slack with-

in the specifie

limits.

[ECA17791]

EAU62983

To a

just the

rive chain slack

Consult a Yamaha dealer before ad-
justing the drive chain slack.

1. Remove the drive chain puller cap,

and then loosen the axle nut and
the locknut on each side of the
swingarm.

1. Drive chain slack

Drive chain slack:

35.0–45.0 mm (1.38–1.77 in)

UB7PEZE0.book Page 24 Thursday, May 9, 2019 9:34 AM

Summary of Contents for R-3



































































































Search results

Summary of Contents for R-3

Reviews:

Related manuals for R-3

Brands by name

Popular brands

Yamaha R-3, Owner'S Manual

Search results

Summary of Contents for R-3

Reviews:

Related manuals for R-3

Brands by name

Popular brands