Yamaha R-3 Owner'S Manual Download Page 20

Page: 20 / 98

Instrument an

control functions

4-1

EAU10462

Main switch/steerin

lock

The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
positions are described below.

EAU85040

All electrical circuits are supplied with
power and the vehicle lights are turned
on. The engine can be started. The key
cannot be removed.

TIP

To prevent battery discharge, do
not leave the key in the on position
without the engine running.

The headlight comes on automat-
ically when the engine is started.

EAU10662

OFF

All electrical systems are off. The key
can be removed.

WARNING

EWA10062

Never turn the key to “OFF” or
“LOCK” while the vehicle is movin

Otherwise the electrical systems will

e switche

off, which may result in

loss of control or an acci

ent.

EAU1068B

LOCK

The steering is locked and all electrical
systems are off. The key can be re-
moved.

To lock the steering

1. Turn the handlebars all the way to

the left.

2. With the key in the “OFF” position,

push the key in and turn it to
“LOCK”.

3. Remove the key.

TIP

If the steering will not lock, try turning
the handlebars back to the right slight-
ly.

OFF

LOCK

1. Push.
2. Turn.

UB7PEZE0.book Page 1 Thursday, May 9, 2019 9:34 AM

Summary of Contents for R-3



































































































Search results

Summary of Contents for R-3

Reviews:

Related manuals for R-3

Brands by name

Popular brands

Yamaha R-3, Owner'S Manual

Search results

Summary of Contents for R-3

Reviews:

Related manuals for R-3

Brands by name

Popular brands