Yamaha PZ50RTX, Owner'S Manual, Page: 45 / 92

Operation
39
NOTE:
If the indicator light keeps flashing, the snow-
mobile is not correctly shifted into drive or re-
verse. If this occurs, applying a little throttle
while applying the brake will help the trans-
mission to engage.
WARNING
EWS00321
●
Make sure that the throttle lever is fully
released and the snowmobile is at a full
stop before shifting.
●
Be sure to press the drive select switch
only while the engine is idling.
●
Make sure that the reverse “R” indicator
light comes on and remains on, and that
the area behind the snowmobile is clear
before reversing. Watch behind.
●
Reduce speed and avoid sharp turning
when operating the snowmobile in re-
verse.
CAUTION:
ECS00050
Do not shift from drive to reverse or from
reverse to drive while the snowmobile is
moving. Otherwise, the drive system
could be damaged.
NOTE:
The reverse buzzer beeps while the transmis-
sion is in reverse.
2. Release the parking brake by moving the
parking brake lever to the right.
3. Press the throttle lever slowly to move the
snowmobile.
4. Turn the handlebar in the desired direc-
tion.
5. Squeeze the brake lever to stop the
snowmobile.
6. Apply the parking brake by moving the
parking brake lever to the left.
ESU11410
Stopping the engine
Turn the main switch to the off position to stop
the engine.
WARNING
EWS00330
●
Push down the engine stop switch to
stop the engine in an emergency.
1. Drive select switch
2. Drive “D” indicator light
3. Reverse “R” indicator light
1. Off
U8GK11E0.book Page 39 Wednesday, April 11, 2007 9:51 AM