Yamaha PZ50RTX, Owner'S Manual, Page: 17 / 92

Control functions
11
ESU10390
Speedometer unit
The speedometer unit is equipped with the
following:
●
a digital speedometer (which shows the
riding speed)
●
an odometer (which shows the total dis-
tance traveled)
●
a tripmeter (which shows the distance trav-
eled since it was last set to zero)
●
an engine speed meter (which shows the
engine speed; not for use while riding)
●
warning indicators (which show self-diag-
nosis, coolant temperature, fuel level, and
oil level warnings)
●
indicator lights (which show high beam, low
coolant temperature, transmission position,
and knock control system conditions)
●
a warning light (which shows warnings to-
gether with the warning indicators)
●
a fuel meter (which shows the fuel remain-
ing in the fuel tank)
●
a grip/thumb warmer level indicator (which
shows the grip warmer or the thumb warm-
er level)
After the main switch is turned on, the warning
light, the low coolant temperature indicator
light, the knock control system “KCS” indica-
tor light, the drive “D” indicator light, the re-
verse “R” indicator light, and all segments of
the meter display turn on and off once.
The grip warmer level is initially displayed for
5 seconds, then the display switches to the
fuel meter.
Odometer, tripmeter, and engine
speed meter modes
Pushing the “SELECT” button switches the
display between the odometer mode “ODO”,
tripmeter mode “TRIP”, and engine speed
meter mode “r/min”.
To reset the tripmeter, push the “RESET” but-
ton for at least 1 second while the tripmeter is
displayed.
1. Warning light “ ”
2. Self-diagnosis warning indicator “ ”
3. Two-digit code “84”
1. Warning light “ ”
2. Low coolant temperature indicator light
“ ”
3. Knock control system “KCS” indicator light
4. Drive “D” indicator light
5. Reverse “R” indicator light
6. Meter display
U8GK11E0.book Page 11 Wednesday, April 11, 2007 9:51 AM