Yamaha PZ50RTX, Owner'S Manual, Page: 24 / 92

Control functions
18
●
Do not use an automotive cigarette light-
er or other accessory with a plug that
gets hot because the jack can be dam-
aged.
ESU10550
Brake lever
The snowmobile is stopped by braking the en-
tire drive system.
Squeeze the brake lever towards the handle-
bar grip to stop the snowmobile.
NOTE:
When the brake lever is operated, the brake
light will illuminate.
CAUTION:
ECS00060
Make sure that the brake lever end does
not project out over the handlebar end.
This will help prevent brake lever damage
when the snowmobile is placed on its side
for service.
ESU10580
Parking brake lever
When parking the snowmobile or starting the
engine, apply the parking brake by moving the
parking brake lever to the left.
To release the parking brake, move the park-
ing brake lever to the right.
WARNING
EWS00060
●
Always set the parking brake before at-
tempting to start the engine.
●
Never run the snowmobile with the park-
ing brake applied. This may overheat the
brake disc and reduce braking ability.
ESU10710
Shroud latches (PZ50VT)
To open the shroud, unhook the shroud latch-
es, and then slowly raise the shroud forward
until it stops. When closing the shroud, slowly
lower it to its home position, and then hook the
shroud latches.
Maximum rated capacity:
DC 12 V, 2.5 A (30 W)
1. Brake lever
1. Parking brake lever
U8GK11E0.book Page 18 Wednesday, April 11, 2007 9:51 AM