manualshive.com logo in svg

Yamaha PZ50RTX, Owner'S Manual, Page: 26 / 92

Share
Download
Yamaha PZ50RTX Owner'S Manual Download Page 26

Control functions

20

WARNING

EWS00100

●

Do not drive the snowmobile with the
shroud or covers unfastened or re-
moved.

●

Keep your body and clothing away from
rotating parts when servicing snowmo-
biles with the shroud open or the covers
removed.

●

Do not touch the hot muffler and engine
during or immediately after operation.

CAUTION:

ECS00160

Make sure that all cables, leads, etc., are
routed properly before closing the shroud
and installing the covers.

ESU10750

Drive guard 

The drive guard is designed to cover the V-
belt clutch and V-belt in case parts break or
come loose.

WARNING

EWS00400

●

Make sure that the drive guard is tight-
ened securely before operating the
snowmobile.

●

Never run the engine with the V-belt or
drive guard removed.

ESU10770

V-belt holder (PZ50VT) 

Keep a spare V-belt for emergency use by
placing it into the V-belt holder provided.

CAUTION:

ECS00190

Make sure that the V-belt is installed se-
curely in the holder.

1. Right upper cover

2. Right side cover

3. Right lower cover

1. Air filter case cover

1. Drive guard

1. V-belt holder

U8GK11E0.book  Page 20  Wednesday, April 11, 2007  9:51 AM

Summary of Contents for PZ50RTX





























































































Reviews:

No comments