Control functions
30
TIP
When the brake lever is squeezed, the brake
light comes on.
NOTICE
ECS00060
Make sure that the brake lever end does
not project out over the handlebar end.
This will help prevent brake lever damage
when the snowmobile is placed on its side
for service.
ESU10581
Parking brake lever
When parking the snowmobile or starting the
engine, apply the parking brake by moving the
parking brake lever to the left.
To release the parking brake, move the park-
ing brake lever to the right.
ESU14211
Drive guard
WARNING
EWS00402
●
Coming in contact with the rotating V-
belt or clutch parts can cause severe in-
jury or death. Never run the engine with
the drive guard removed.
●
Make sure that the drive guard is in-
stalled securely before operating the
snowmobile to protect against severe
injury or death from a broken V-belt or
other part should it come off the snow-
mobile while it is in operation.
NOTICE
ECS00930
●
Never run the engine with the V-belt re-
moved. Clutch components can be dam-
aged.
●
Be careful not to scratch the windshield
when removing or installing the drive
guard.
The drive guard is designed to protect the V-
belt clutch and V-belt in case parts break or
come loose.
The drive guard is located behind the left side
cover. (See page 60 for removal procedures.)
To remove the drive guard
1.
Pull out the drive guard locking pin from
the drive guard upper holder.
1. Brake lever
1. Parking brake lever
U8GKS6E0.book Page 30 Tuesday, April 17, 2012 8:48 AM
