Control functions
28
ESU10545
Drive select switch
The drive select switch is used to shift the
snowmobile into drive or reverse. After com-
ing to a complete stop, press the drive select
switch.
The drive indicator light comes on when the
transmission is in drive (forward).
The reverse indicator light comes on when the
transmission is in reverse.
NOTICE
ECS00052
Do not use the drive select switch while
the snowmobile is moving. Otherwise, the
drive train could be damaged.
ESU10531
Engine stop switch “ ”
The engine stop switch is used to stop the en-
gine in an emergency. Simply push the stop
switch to stop the engine. To start the engine,
pull the stop switch and proceed with starting
the engine. (See page 47 for engine starting
procedures.)
During the first few rides, practice using the
stop switch so that you can react quickly in an
emergency.
ESU10661
Headlight beam switch
“LIGHTS”
Push the headlight beam switch to change the
headlight to high beam “HI” or to low beam
“LO”.
1. Warning light “
”
2. Engine trouble warning indicator “
”
3. Error code display
1. Drive select switch
2. Drive indicator light “
”
3. Reverse indicator light “
”
3
2
1. Engine stop switch “
”
1. Headlight beam switch “LIGHTS”
2. High beam “HI”
3. Low beam “LO”
U8GKS6E0.book Page 28 Tuesday, April 17, 2012 8:48 AM
