Yamaha PZ50GTX Supplementary Service Manual Download Page 85

Page: 85 / 114

SPEC

To the oil pressure switch

Throttle position sensor coupler

Fuel hose

Fasten the corrugated tube and
wire harness to the frame front
cross member with the plastic
band. (PZ50/PZ50GT/PZ50RT/
PZ50MT)

Sub-wire harness coupler

Fasten the corrugated tube to the
headlight stay with the plastic
band. (PZ50/PZ50GT/PZ50RT/
PZ50MT)

Fasten the fuel hose with the
hose clamp. Face the ends of the
hose clamp outward, angled 45°
downward.

Rectifier/regulator

Frame ground lead

Wire harness

Speed sensor coupler

Fuel tank breather hose

Fasten the speed sensor lead
and fuel tank breather hose to
the frame rear cross member
with the plastic band.

To the auxiliary DC jack
(PZ50GT/PZ50RT/PZ50MT/
PZ50VT/PZ50MP)

Fasten the speed sensor lead
and fuel tank breather hose with
the holder.

Drive guard

Fasten the speed sensor lead
and fuel tank breather hose with
a plastic locking tie.

Fasten the speed sensor lead
and fuel tank breather hose with
the holder. Be sure to bend the
holder so that the lead and hose
will not come loose.

Fasten the speed sensor lead
with the holder. Be sure to bend
the holder so that the lead will
not come loose.

Speed sensor

Summary of Contents for PZ50GTX



















































































































Search results

Summary of Contents for PZ50GTX

Reviews:

Related manuals for PZ50GTX

Brands by name

Popular brands

Yamaha PZ50GTX, Supplementary Service Manual

Search results

Summary of Contents for PZ50GTX

Reviews:

Related manuals for PZ50GTX

Brands by name

Popular brands