Yamaha PW80(Z) Owner'S Manual Download Page 5 | Manualshive

Page: 5 / 72

background image

INTRODUCTION

EAU41582

Congratulations on your purchase of the Yamaha PW80(Z). This model is the result of Yamaha’s vast experience in the pro-
duction of fine sporting, touring, and pacesetting racing machines. It represents the high degree of craftsmanship and reli-
ability that have made Yamaha a leader in these fields.
This manual will give you an understanding of the operation, inspection, and basic maintenance of this motorcycle. If you
have any questions concerning the operation or maintenance of your motorcycle, please consult a Yamaha dealer.
The design and manufacture of this Yamaha motorcycle fully comply with the emissions standards for clean air applicable
at the date of manufacture. Yamaha has met these standards without reducing the performance or economy of operation of
the motorcycle. To maintain these high standards, it is important that you and your Yamaha dealer pay close attention to the
recommended maintenance schedules and operating instructions contained within this manual.
Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most cur-
rent product information available at the time of printing, there may be minor discrepancies between your motorcycle and this
manual. If there is any question concerning this manual, please consult a Yamaha dealer.

WARNING

EWA10031

Please read this manual carefully and completely before operating this motorcycle.

WARNING

EWA14351

This motorcycle is designed and manufactured for off-road use only. It is illegal to operate this motorcycle on any
public street, road or highway. Such use is prohibited by law. This motorcycle complies with almost all state
off-highway noise level and spark arrester laws and regulations. Please check your local riding laws and regulations

before operating this motorcycle.

AN IMPORTANT SAFETY MESSAGE:

●

Read this manual carefully and completely before operating this motorcycle. Make sure you understand all instructions.

●

Pay close attention to the warning and notice labels on the motorcycle.

●

Never operate a motorcycle without proper training or instruction.

●

Weight of the rider should not exceed 40 kg (88 lb).

«
...
3
4
5
6
7
...
»

Summary of Contents for PW80(Z)









































































Reviews:

No comments

Related manuals for PW80(Z)

SBL.04.650.10000/B

Brand: SW-Motech Pages: 2

Two Fifty 250 cc

Brand: Mash Pages: 62

ZTechnik VStream Z2392

Brand: National Cycle Pages: 2

Brand: PUIG Pages: 6

Brand: Megelli Pages: 83

HPS.08.473.10000/B

Brand: SW-Motech Pages: 4

Brand: Öhlins Pages: 2

Montana 7 Series

Brand: Garmin Pages: 24

Brand: DYNATEK Pages: 4

Brand: Twiins Pages: 40

Brand: Fekon Pages: 24

Brand: Yamaha Pages: 42

Brand: Yamaha Pages: 78

Brand: Yamaha Pages: 84

NMAX GPD155 2020

Brand: Yamaha Pages: 92

Brand: Yamaha Pages: 98

Brand: Yamaha Pages: 106

Brand: Yamaha Pages: 90

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands