Yamaha PW80(Z) Owner'S Manual Download Page 27

Page: 27 / 72

INSTRUMENT AND CONTROL FUNCTIONS

4-5

tank cap and add the recommend-
ed oil.

3. Install the 2-stroke engine oil tank

cap.

NOTICE

ECA16670

Make sure that the 2-stroke engine

oil tank cap is properly installed.

4. Install the seat.

EAU13561

Fuel cock

The fuel cock supplies fuel from the
tank to the carburetor while filtering it al-
so.
The fuel cock has three positions:

OFF

With the lever in this position, fuel will
not flow. Always return the lever to this
position when the engine is not running.

With the lever in this position, fuel flows
to the carburetor. Normal riding is done
with the lever in this position.

RES

1. 2-stroke engine oil tank

2. 2-stroke engine oil tank cap

Recommended oil:

See page 9-1.

Oil quantity:

0.75 L (0.79 US qt, 0.66 Imp.qt)

1. Arrow mark positioned over “OFF”

RES

FUEL

OFF

1. Arrow mark positioned over “ON”

1. Arrow mark positioned over “RES”

FUEL

RES

OFF

FUEL

RES

Summary of Contents for PW80(Z)









































































Search results

Summary of Contents for PW80(Z)

Reviews:

Related manuals for PW80(Z)

Brands by name

Popular brands

Yamaha PW80(Z), Owner'S Manual

Search results

Summary of Contents for PW80(Z)

Reviews:

Related manuals for PW80(Z)

Brands by name

Popular brands