background image

 

5-1

 

2

3

4

5

6

7

8

9

 

FOR YOUR SAFETY – PRE-OPERATION CHECKS

 

EAU15596

 

Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always follow the inspection
and maintenance procedures and schedules described in the Owner’s Manual.

WARNING

 

EWA11151

 

Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equipment damage.
Do not operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in

 

this manual, have the vehicle inspected by a Yamaha dealer.

 

Before using this vehicle, check the following points:

 

ITEM

CHECKS

PAGE

Fuel

 

 

Check fuel level in fuel tank.

 

 

Refuel if necessary.

 

 

Check fuel line for leakage.

4-3

 

2-stroke engine oil

 

 

Check oil level in oil tank.

 

 

If necessary, add recommended oil to specified level.

 

 

Check vehicle for oil leakage.

4-4

 

Transmission oil

 

 

Check oil level in transmission case.

 

 

If necessary, add recommended oil to specified level.

7-7

 

Front brake

 

 

Check operation.

 

 

Lubricate cable if necessary.

 

 

Check lever free play.

 

 

Adjust if necessary.

7-13, 7-15

 

Rear brake

 

 

Check operation.

 

 

Check pedal free play.

 

 

Adjust if necessary.

7-14

 

Throttle grip

 

 

Make sure that operation is smooth.

 

 

Check cable free play.

 

 

If necessary, have Yamaha dealer adjust cable free play and lubricate cable and 
grip housing.

7-11, 7-18

 

Control cables

 

 

Make sure that operation is smooth.

 

 

Lubricate if necessary.

7-18

Summary of Contents for PW80(Z)









































































Reviews: