Yamaha PW50W 2007, Service Manual, Page: 82 / 168

CHAS
STEERING HEAD
4-29
b. Remove the bearing race from the lower
bracket with a floor chisel
2
and hammer.
c. Install a new bearing races.
c C
If the bearing race is not installed properly,
the steering head pipe could be damaged.
NOTE:
9
Always replace the bearings and bearing
races as a set.
9
Whenever the steering head is disassem-
bled, replace the rubber seal.
▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲▲
INSTALLING THE STEERING HEAD
1. Lubricate:
9
Upper ball bearing
1
9
Lower ball bearing
2
9
Bearing race
2. Install:
9
Lower bracket
9
Ring nut
Refer to “CHECKING AND ADJUSTING
THE STEERING HEAD” in chapter 3.
Recommended lubricant
Lithium-soap-based grease
1
2
5PG-7-10 80 06.5.16, 17:43:20