Yamaha PW50W 2007, Service Manual, Page: 117 / 168

ENG
5-24
CLUTCH
CHECKING THE PRIMARY DRIVE GEAR
1. Check:
9
Primary drive gear
1
Damage/wear
→
Replace the primary
drive and clutch carrier assembly.
Excessive noise during operation
→
Replace the primary drive and clutch carri-
er assembly as a set.
CHECKING THE PRIMARY DRIVEN GEAR
1. Check:
9
Primary driven gear
Damage/wear
→
Replace the primary
drive and clutch carrier assembly as a set.
Excessive noise during operation
→
Replace the primary drive and clutch carri-
er assembly as a set.
CHECKING THE CLUTCH HOUSING
1. Check:
9
Clutch housing
Damage/wear
→
Replace the clutch hous-
ing.
1
2. Measure:
9
Clutch housing inside diameter
Out of specification
→
Replace the clutch
housing.
Clutch housing inside diameter
105 mm (4.13 in)
Limit
106 mm (4.17 in)
a
CHECKING THE CLUTCH SHOES
The following procedure applies to all of the clutch shoes.
1. Check:
9
Clutch shoe
Damage/wear
→
Replace the clutch shoes and
springs as a set.
Glazed areas
→
Sand with course sandpaper.
NOTE:
9
After sanding the glazed areas, clean the clutch with a cloth.
9
Do not apply the grease or oil on the clutch shoes.
5PG-7-10 115 06.5.16, 17:44:07