Yamaha PW-SE series Original Instructions Manual Download Page 19

Page: 19 / 60

INSTRUMENT AND CONTROL FUNCTIONS

Displaying and switching the assist mode

You can select the assist mode by using the assist mode

switches (up & down).

The selected assist mode is displayed by the assist mode

indicator and assist mode lamp color.

• When you press the assist mode switch (up), the mode

changes from “OFF” to “+ECO” to “ECO” to “STD”, or

from “STD” to “HIGH”.

• When you press the assist mode switch (down), the

mode changes from “HIGH” to “STD”, or “STD” to

“ECO”, or “ECO” to “+ECO” or “+ECO” to “OFF”.

TIP

• Further pressing of the assist mode switch will not cy-

cle the assist mode selections.

• In the Off mode, the assist power meter are not dis-

played.

• You can keep the assist mode lamp unlit.

For more information, see “Stopwatch and settings”.

HIGH

Hide

Green

Blue

Green

Assist

mode

Assist mode

indicator

Assist mode

lamp

STD

ECO

+ECO

OFF

Off mode

Assist mode indicator

Assist mode lamp

Assist power

meter

Summary of Contents for PW-SE series





























































Search results

Summary of Contents for PW-SE series

Reviews:

Related manuals for PW-SE series

Brands by name

Popular brands

Yamaha PW-SE series, Original Instructions Manual

Search results

Summary of Contents for PW-SE series

Reviews:

Related manuals for PW-SE series

Brands by name

Popular brands