PSR-SX600 Owner’s Manual
85
R
e
gi
str
at
io
n Memor
y
/P
la
yli
s
t
–
Sa
vin
g
and
R
ec
a
llin
g Cu
st
om P
anel
Set
up
s
7
1
Make the desired panel settings, such as those for Voices,
Styles and Effects.
For information on the panel settings that can be registered with the
Registration Memory function, refer to the Registration section of the
“Parameter Chart” in the Data List on the website.
2
Press the [MEMORY] button in the REGISTRATION MEMORY
section.
The display for selecting the groups to be registered appears.
3
Determine the groups you want to register.
Select the desired item by using the Cursor buttons [
][
][
E
][
F
], and then
press the [ENTER] button to enter a checkmark for the item.
To cancel the operation, press one of the [8
] (Cancel) buttons.
4
Press one of the REGISTRATION MEMORY [1] – [8] buttons to
which you wish to memorize the panel setup.
The memorized button becomes red, which indicates the number button
contains data and its number is selected.
5
Register various panel setups to other buttons by repeating
steps 1 – 4.
The registered panel setups can be recalled by simply pressing the desired
number button.
Registering Your Panel Setups
3
NOTE
You can also use the Data dial to
select, and the [-/NO]/[+/YES] buttons
to enter or remove checkmarks.
NOTICE
If you select the button whose
lamp is lit in red or blue here,
the panel setup previously mem-
orized to the button will be
erased and replaced by the new
settings.
About the lamp status
•
Red:
Data registered and currently selected
•
Blue:
Data registered but not currently selected
•
Off:
No data registered
NOTE
The panel setups registered in the
numbered buttons are maintained even
when you turn off the power. If you
want to delete all the eight current
panel setups, turn the power on while
holding the B5 key (right-most B key
on the keyboard).
