background image

PSR-S950/S750 Reference Manual

7

1

V

oices

This instrument features Voices provided specially for Style playback and XG/GM compatibility. These 
Voices cannot be called up directly from the VOICE category selection buttons. However, they can be called 
up as described below.

1

Press the PART SELECT button corresponding to the Voice you want to call up.

2

Press one of the VOICE category selection buttons (other than the [ORGAN FLUTES] 
and [USER/EXPANSION] buttons) to call up the Voice Selection display.

3

Press the [8

] (UP) button to call up the Voice categories.

4

Press the [2

] (P2) button to display Page 2.

5

Press the desired [A]–[J] button to call up the Voice Selection display of GM&XG 
Voices, GM2 Voices, etc.

NOTE

You can find the “Legacy” folder in this display. This folder contains previous Yamaha keyboards’ Voices (such as PSR-S910, PSR-S710, etc.) for data 
compatibility with other models.

NOTE

The “StyleVoices” folder contains the MegaVoices (

page 6

). 

6

Select the desired Voice.

Selecting GM&XG or Other Voices

4

3

Summary of Contents for PSR-S750























































































































Reviews: