32
PSR-S950/S750 Reference Manual
2
St
yles
• Setting the Source Root/Chord if necessary
Although the Source Root/Chord is set to CMaj7 as described above, you can change this to any desired
key or chord. Use the TAB [
E
][
F
] buttons to call up the PARAMETER page, and set the SOURCE
ROOT and CHORD to the favorite or desired Root and Chord type. Keep in mind that when you change
the Source Chord from the default CMaj7 to another chord, the chord notes and recommended notes will
also change. For details, refer to
3
Press the STYLE CONTROL [START/STOP] button to start recording.
Since already recorded data plays back, use the [1
]–[8
] buttons to turn on or off each channel as
desired. If you selected an Audio Style as starting data, turn on or off the Audio part via the [H] button.
4
As soon as loop playback returns to the first beat in the first measure, start playing
the bass line, chord backing or phrase to be recorded.
5
Press the [START/STOP] button to stop playback.
If you want to add more notes, press the [START/STOP] button again to continue recording.
• To hear the playback sound of the already recorded channels with another Source Chord/Root:
1) Use the TAB [
E
][
F
] buttons to call up the PARAMETER page.
2) While holding down the [F] (REC CH) button, press the [1
] or [2
] button to set a Rhythm
channel to REC.
3) Press the STYLE CONTROL [START/STOP] button to start playback.
4) On the PARAMETER page, set the PLAY ROOT and CHORD to the desired Chord root and Chord
type.
The above operation lets you hear how the Source Pattern is played back via chord changes during normal
performance.
6
Press the [1
] or [2
] button to disengage Record.
